And we’re going to guide you, on how to replace washing machine clutch. No worries, it’s simpler than it seems! Just let our guide lead the way and your washing machine will be back in working order before you know it!
Preparation and precautions
Before you begin, though, there’s some important prep work to do. You want to be safe and prepared before you start.
Have with you all of the tools and parts required. All you really need for this washer clutch install is a wrench, a screwdriver, and a new washing machine clutch.
Unplug your washing machine before you begin. Safety first!
Place a towel or old blanket on the floor. This will prevent your washing machine from wearing down and save your knees from aching as you work.
Now that you are safe and setup, time to get to work and replace that old clutch with a new one!
Removing the Old Clutch
Locate the clutch assembly of your washing machine. Typically found beneath the machine near the motor.
Unscrew the old clutch by means of the wrench to remove it. Be sure not to misplace screws or bolts!
After the bolts are removed, carefully remove the old clutch. It might be a little fiddly, but with some patience, you will get there!
With that old clutch out, it’s time to get the new one back in the machine and back on track.
Installing the New Clutch
Put in the new clutch into the place where the old one was. Be sure it’s a good fit and lined up properly before you tighten down the bolts.
Use the wrench to secure the bolts and support the new clutch.
Make sure the new clutch is installed properly and is not loose before proceeding.
Now the new clutch is bolted in, so let’s do some final adjustments and give it a test to check it all works well.
CLUTCH ADJUSTMENT AND TESTING
Restart your washing machine and run a test cycle. Watch and listen for any unusual noises or vibrations.
If all this sounds good, you’re ready to go! If you notice anything amiss, double check the clutch installation and adjust if necessary.
Once you’re certain the new clutch is functioning properly, you can begin to use your washer once more!
To keep your washing machine in good working condition, here’s what to do if your washer filled with water but didn’t continue the cycle, and how to keep it running smoothly in the future.
Troubleshooting/maintenance tips
Regularly clean the drum of the whirlpool washer transmission and lint filter. This keeps it from clogging up and improves the cleaning performance.
You need to search for any leaks or odd sounds and resolve the issue as soon as possible to prevent further damage.
If you ever experience issues with the washing machine clutch in the future, use this guide to assist you in replacing it.
You can change a washing machine clutch easily by following these suggestions and guidelines. Stay safe and take your time to do everything right. Your washing machine will be back to working perfectly in no time!